Newcamd and CCcam on Galaxy Innovation

First connect Ethernet cable or WI FI USB stick to receiver. Enter Menu/Internet/network Local Setting.
Must see did receiver obtained IP address correctly, if it is ok, you will see your IP address in this window after
couple seconds. If not, switch DHCP to OFF and set IP manually.
Then go to MENU/Internet/Net client config You can choose server here, there can be maximum 8 servers.
Press YELLOW button to EDIT server.
Edit each field replacing the text with your server settings.
If server which you connect to is NEWCAMD, you should get from your donor:
1. Server name (or IP of the server)
2. Service port
3. User name
4. Password and DES key

Press ACTIVE SERVER (dot from left side will change color from white to green)
and press STORE to save settings
If you have access to CCCAM server, you have to input:
1. Server name (or IP of the server)
2. Service port
3. User name
4. Password
Press ACTIVE SERVER (dot from left side will change color from white to green)
Make sure you changed protocol to CCCAMD
Press STORE to save settings
After Exit receiver will automatically try to connect to the server, if all ok, will color of the server will change to
green.